Canadian Dollars
British Pound
Toaiot Bmcu 370C AMS lite BMCU370C Auto Refill Farm for A1 A1 MINI 3D printer AMS MMU
Toaiot Bmcu 370C AMS lite BMCU370C Auto Refill Farm for A1 A1 MINI 3D printer AMS MMU
Notes on Connecting to a BMCU
1. Both ends of the 4P cable have anti-reverse design. Ensure the connectors are correctly connected to prevent damage to the motherboard due to reverse insertion.
2. Hot plugging is strictly prohibited: Always turn off the power when connecting or disconnecting the printer.
For the gear:182a is a direct drive version, and the gears will wear out faster. We are shipping a high torque version, not a direct drive version.We upgraded the gear
Important: Before each printing, please make sure that the optionof long retraction when cut in filament setting is turned off,otherwise the filament hub or BMCU may be damaged.
Warning: Before you turn off the printer, make sure that no filament is loaded into the tool head. Otherwise, when you load or unloadthe filament again when you turn on the printer next time, the error warning "Falled to check the flament iocation" will appear. If youhave fallen into this situation, don't panic. You can unplug the PTFEtube of the corresponding channel from the connector of theBMCU, then manually press the cutter leveron the tool head to cut the filament, then press the lever on theleft ofthe tool head toreleasethe filament, then pull the filament back from the BMCU,and finally insert the tube back into the BMCU.
